March 27, 2019
Posted by on
I thought this might be helpful to share with anyone looking to quickly pull all vlans assigned to a port on a Dell S4810 switch. I think this command works in most FTOS switches.
In this example I need to get all vlans assigned to a port-channel regardless of tagged or untagged. I can always look through the config and see what ports are tagged/untagged on the vlan but this can be a real pain.
So lets see the better option. My port channel is 128. Below shows the output of the command “Show interface switchport X” .
S4810-SW1#show int switchport port 128
Codes: U – Untagged, T – Tagged
x – Dot1x untagged, X – Dot1x tagged
G – GVRP tagged, M – Trunk, H – VSN tagged
i – Internal untagged, I – Internal tagged, v – VLT untagged, V – VLT tagged
Name: Port-channel 128
Description: “Etherchannel to 6060 for internal”
Native VlanId: 999.