Tag Archives: media

Finding Transceiver info in Ruckus ICX switches

I needed to find out what type of Optic was installed into a switch, and if it read up correctly. In most vendors its “show interface transceivers” or some other command. I struggled to find Ruckus’s – so I thought I would share.

To find the media type of the port – just use the “Show media” command – so easy!

For instance, I need to find out what type SFP is on eth 1/2/8, and if it read correctly. Check out the below:

Then, if I just want to check what all ports are: “Show media” by itself. Notice ports 1/2/1 and 1/2/3 are my stack ports – and I have DACs (twinax) in these ports.